Skip to main content
Logo

European Partnership

European Union flag
Clean Hydrogen Partnership
Project

Low temperature Solid Oxide Fuel Cells for micro-CHP applications

Since the requirements of micro-CHP systems in the European Union are becoming clearer, the technologies to reach these goals are emerging steadily. The high intrinsic electrical efficiency and the capability to be directly connected to existing heating circuits, make solid oxide fuel cells a preferred choice for this application. This proposal describes the project to build a prototype of a new generation SOFC system based on novel materials, which can run at significantly lower temperatures than today. The lower temperatures provide the opportunity to use less expensive materials and still increase the reliability of the components and thus of the whole system. State-of-the-art SOFC systems operate at much higher temperatures, which causes severe issues on degradation and limited lifetime of the materials. The novel materials will eliminate those problems and will also give a higher stability against reduction-oxidation cycles of the electrodes, bringing the technology a step further towards commercialisation.

The objective of the LOTUS project is to build and test a Low Temperature SOFC system prototype based on new SOFC technology combined with low cost, mass-produced, proven components. The use of a modular concept and design practices from the heating appliances industry will reduce maintenance and repair downtime and costs of the system.

The consortium gathered to work in this project is a combination of partners who have experience in:

1. Defining the market requirements
2. Translating these requirements into technical specifications and models
3. Design and build a prototype system
4. Test and validate the system
5. Bringing the technology to market

This covers the whole value chain of the system under discussion.

The final result is a working prototype of the system, which shows that it is able to run in a laboratory environment mimicking real-life use, and is robust enough to be ready for the next phase of field trials

Topic:

Topic SP1-JTI-FCH.2009.3.5: Proof-of-concept fuel cell systems

Coordinator:

Hygear Fuel Cell Systems, The Netherlands

Contact:

Mr. Ellart DE WIT

Other participating organisations:

SolidPower Italy
Fraunhofer-institut für KeramiscHe technologien und Systeme Germany
Domel, d.d. Slovenia
University of Perugia Italy
JRC - Joint Research Centre, European Commision Belgium