Hydrogen is expected to be highly valuable energy carrier for the 21st century as it should participate in answering main societal and economical concerns. To exploit its benefits at large scale, further research and technological developments are required. In particular, the storage of hydrogen must be secured. Even if burst in service of pressure vessels in composite material is very unlikely, when exposed to a fire, they present safety challenges imposing to correctly size their means of protection.
The main objective of FireComp project is thus to better characterize the conditions that need to be achieved to avoid burst. To this aim, experimental work will be done in order to improve the understanding of heat transfer mechanisms and the loss of strength of composite high-pressure vessels in fire conditions. We will then model the thermo-mechanical behaviour of these vessels.
Different applications will be considered: automotive application, stationary application, transportable cylinders, bundles and tube trailers. A risk analysis will be conducted for each application leading to the definition of optimised safety strategies.
The main outputs of the project will be recommendations for Regulation Codes and Standards regarding the qualification of high-pressure composite storage and sizing of its protections.
The FireComp project brings together partners from diverse expertise: a GCH (Gaseous Compressed Hydrogen) technology integrator as a coordinator (AIR LIQUIDE), a pressure vessel supplier (HEXAGON), a leading actor in international Standards, Codes and Regulations development (HSL), experts in industrial risks (INERIS), experts in thermal radiation and mechanical behaviour of the composite (CNRS (Pprime & LEMTA), LMS Samtech), experts in thermal degradation and combustion of composites, numerical simulation (Edinburgh University and LMS Samtech) and an expert in European R&D collaborative project management (ALMA).
Topic:
SP1-JTI-FCH.2012.5.4 - Pre-normative research on fire safety of pressure vessels in composite materials
Coordinator:
L'AIR LIQUIDE S.A., France
Contact:
Mr. Lucas Bustamante-valencia
Other participating organisations:
Organisation | Country |
CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE | France |
THE UNIVERSITY OF EDINBURGH | United Kingdom |
RAUFOSS FUEL SYSTEMS AS | Norway |
INSTITUT NATIONAL DE L ENVIRONNEMENT ET DES RISQUES INERIS | France |
HEALTH AND SAFETY EXECUTIVE | United Kingdom |
SAMTECH SA | Belgium |
ALMA CONSULTING GROUP SAS | France |
- Reference
- 325329
- Project duration
- 1 Jun 2013 - 31 May 2016
- Project locations
- 75007 PARIS 07, France
- Overall budget
- €3 543 500
- EU contribution
- €1 877 55053% of the overall budget
- Project website
- http://cordis.europa.eu/project/rcn/109427_en.html