PCFC is one of the most promising technologies to reach the requirements related to cogeneration application, especially for small power systems (1-5 kWel). The investigation in the concept of advanced thin-film ceramic fuel cell technology at operating intermediate temperature between 400 and 700 °C aims at improving the characteristics (thermal cycling, heat transfer, current collection,.) as well as lowering drastically the costs of the system.
The aim of METPROCELL is to develop innovative Proton Conducting Fuel Cells (PCFCs) by using new electrolytes and electrode materials and implementing cost effective fabrication routes based on both conventional wet chemical routes and thermal spray technologies. Following a complementary approach, the cell architecture will be optimised on both metal and anode type supports, with the aim of improving the performance, durability and cost effectiveness of the cells.
- Development of novel electrolyte (e.g. BTi02, BCY10/BCY10) and electrode materials (e.g. NiO-BIT02 and NiO-BCY10/BCY10 anodes) with enhanced properties for improved proton conducting fuel cells dedicated to 500-600°C.
- Development of alternative manufacturing routes using cost effective thermal spray technologies such detonation spraying (electrolytes and protective coatings on interconnects) and plasma spraying (anode).
- Development of innovative proton conducting fuel cell configurations to be constructed on the basis of both metal supported and anode supported cell designs.
- To up-scale the manufacturing procedures based on both conventional wet chemical methods and thermal spraying for the production of flat Stack Cells with a footprint of 12 x 12 cm.
- Bring the proof of concept of these novel PCFCs by the set-up and validation of prototype like stacks in two relevant industrial systems, namely APU and gas/micro CHP.
SP1-JTI-FCH.2010.3.1 - Materials development for cells, stacks and balance of plant (BoP)
FUNDACION TECNALIA RESEARCH & INNOVATION, Spain
Dr.-Ing. María Parco
Other participating organisations:
|EUROPAICHES INSTITUT ENERGIEFORSCHUNG ELECTRICITE DE FRANCE/UNIVERSITAT KARLSRUHE (TH)||Germany|
|Centre National de la Recherche Scientifique (CNRS)||France|
|DANMARKS TEKNISKE UNIVERSITET||Denmark|
|(TOPSOE FUEL CELL A/S)||Denmark|
|Ceramic Powder Technology AS||Norway|
|MARION TECHNOLOGIES S.A.||France|
- Project duration
- 1 Dec 2011 - 31 May 2015
- Project locations
- 48160 DERIO, Spain
- Overall budget
- €3 447 870
- EU contribution
- €1 822 26052.9% of the overall budget
- Project website