H2Ref addresses the compression and buffering function for the refuelling of 70 MPa passenger vehicles and encompasses all the necessary activities for advancing a novel hydraulics-based compression and buffering system that is very cost effective and reliable from TRL 3 (experimentally proven concept) to TRL 6 (technology demonstrated in relevant environment), thereby proving highly improved performance and reliability in accordance with the following targets that have been defined considering the intrinsic characteristics of this new solution:- Throughput: 70 MPa dispensing capacity of 6 to 15 vehicles per hour (i.e. 30 to 75 kg/hr) - depending on the inventory level in source storage of the compressed hydrogen - with a 75 kW power supply;- Robustness and Reliability: 10 years of operation without significant preventive maintenance requirement, demonstrated through intensive lab test simulating 20 refuellings per day during 10 years, i.e. 72,000 refuellings;- CAPEX: Manufacturing cost of 300 k€ for the compression and buffering module (CBM) assuming serial production (50 systems/yr).
This level of cost for the CBM allows to target a cost of 450 k€ for the complete HRS (including pre-cooling and
dispensing), assuming application of the optimized approaches for pre-cooling and dispensing control being developed in the HyTransfer project, far below the current HRS cost of approximately 900 k€;- Energy efficiency: average consumption for compression below 1.5 kWh/kg of dispensed hydrogen, i.e. 50% below the energy consumption of current systems, in fuelling stations supplied by trailers, which is and will likely remain the most common form of supply.The knowledge gained will allow subsequent development to focus on optimization of components, of design for manufacturing and maintenance, further demonstration, and the development of a product range for different refuelling station sizes, thus taking this innovation to the market.
FCH-01.5-2014 -Development of cost effective and reliable hydrogen refuelling station components and systems for fuel cell vehicles
CENTRE TECHNIQUE DES INDUSTRIES MECANIQUES, FRANCE
Other participating organisations:
|HEXAGON RAUFOSS AS||Norway|
|THE CCS GLOBAL GROUP LIMITED||United Kingdom|
- Project duration
- Project locations
- 60304 SENLIS CEDEX, France
- Overall budget
- €6 453 860
- EU contribution
- €5 968 55092.5% of the overall budget
- Project website